Foot, tyre and snow print

Foot, tyre and snow print

Foot, tyre and snow print

ISOMARK FOOTPRINT is a two part silicone compound supplied in ready-to-use twin pack cartridges.The compound is applied ready-mixed to the mark using a robust dispening system and cures quickly to form an accurate, flexible cast.

ISOMARK FOOTPRINT has been designed specifically for casting shoemarks in soil, sand etc. and can even be used in wet or very cold conditions. Typical curing times are between 3 and 10 minutes to a maximum of 20 minutes in freezing temperatures.

ISOMARK FOOTPRINT provides a fast, clean cost effective approach to shoemark casting.

BENEFITS

  • fast compound setting time (typically 3 – 10 minutes)
  • no mess
  • quality result every time (even in wet or cold conditions)
  • time saving, cost effective method
  • optimised for laboratory analysis

FEATURES

  • quick and easy to use
  • robust application system
  • high accuracy durable silicone cast
  • easily stored permanent record

Recommended compounds for this application

Snow Prints
When casting SNOW marks it is important to cool the cartridge down to the outside temperature before application to avoid melting the mark. At low and freezing temperatures the compound will take longer to cure.

Useful links

Applications

ISOMARK compounds can replicate deep fine marks and even marks with re-entrant geometries to exceptional levels of accuracy...
ISOMARK compounds can cast finger marks with great accuracy on irregular surfaces. The cast can also simultaneously retrieve DNA...
ISOMARK FOOTPRINT has been formulated specifically for casting shoe marks in sand, soil, etc and is a reliable and fast...
ISOMARK compounds cure to a very high strength and elastic polymer allowing replication and recovery from gun barrels...
ISOMARK compounds can be sprayed over scrime scenes such as burnt out cars to remove smoke and soot enabling finger...
ISOMARK compounds can be used to succesfully record indentations on paper and card surfaces...